The AC Infinity Iongrid indoor LED grow light has an innovative halo design crafted to maximize plant yields by providing uniform coverage and deeper light penetration. This LED grow system uses the latest Samsung LM301H diodes to efficiently produce full-spectrum lighting fit for use during the germination, vegetative, and flowering stages. Each system includes a programmable controller that is capable of efficient 0-100% PWM dimming. Set consistent light schedules, light cycles, and timers. Customize transitions that can mimic the gradual dimming of sunrise and sunset. Features baseline brightness levels and backup memory in case of a temporary power loss. Controllers can be detached to be mounted remotely and are built with extension ports to provide programming to additional LED grow lights. Requires standard 110/120 volt outlet.
Iongrid T22 Light Includes
- 130 watt LED grow light
- T22 Smart Controller
- Fixture comes with a 12' 110/120 volt power cord
Iongrid T22 LED Specifications
- Light output: 19,000 lumens
- Wattage: 130
- Primary growing area: 2' x 2'
- Secondary growing area: 5' x 5'
- Recommended height above plants: 1' to 3'
- Heat output: Very Low
- Bulb life: 50,000 hours
- Dimensions: 13"L x 13"W x 2½"H
- Weight: 6 lbs.
PLANT GROW LIGHT GUIDE
The growing areas listed above assume the light bulbs are being used in a
with a reflector similar in quality to the ones offered on this web site.
Primary - Use this area if the grow light
will be the main or only source of light for the plants. This includes areas where
minimal light comes from
windows or standard house/office lights.
Secondary - Use this area if the grow light
will be used in a greenhouse or other area that receives direct sunlight for part
of the day to supplement the grow light.
Type of Bulb
Average Bulb Temperature
LED & T5 Fluorescent
100 to 120° F
CFL (Compact Fluorescent)
130 to 180° F
220 to 260° F
MH and HPS
450 to 550° F
Long Should Grow Lights Run?
|This depends on the type of plant. Foliage plants
need about 14-16 hours of light per day. Flowering plants need 12-16 hours of
light per day. You should give most plants at least 8 hours of total darkness
daily. Try to have the lights on at the same time every day. Using an automatic
timer for your lights is recommended to make it easier.
Electrical Cost to Run a Grow Light System
| To get the operating cost per hour for a light,
take the lights combined wattage, and divide it by 1000 to get the kilowatts used.
Then multiply that number by the amount your electric company charges per kilowatt
hour. HID lights will use the number of watts it emits per hour, ie; 600w system
will use 600 watts per hour (regardless of spectrum).
(light wattage output
electricity cost per kilowatt hour
= Operating cost per hour
operating cost per hour x hours
used per month = Operating cost per month
Iongrid T22 LED Grow Light Instruction Manual