Products 1-18 of 18
Show
LuxPRO Low Voltage Heating Thermostat
Retail: $36.89
Price: $29.95
Availability: In Stock
Item #: 4820510 -

    This thermostat can be used with heating and/or cooling appliances and adds both an on/off switch which allows it to cut the appliance off when not in use and auto fan switch which allows you to run the fan on heaters like the Modine and Sterling units continuously and act as a circulation fan. A useful feature in the summer and winter.Thermostat has a temperature range of 50° to 90° F, a separate thermometer display for determining room temperature, and require wiring.Features50° to 90° F...

    RobertShaw Programmable Heating Thermostat thermostat, heating, low, voltage, programmable, digital, thermastat, best, heater, heat, 24
    Price: $44.95
    Availability: In Stock
    Item #: 4820085 -

      This energy-saving thermostat has up to 4 different daily temperature settings during weekdays and another 4 on weekends. The thermostat can be set to automatically lower the night temperature and raise it in the morning and you will have 2 extra settings that can be set to automatically raise or lower the temperature anytime you want! Unit also allows an appliance to be cut off when you do not want it to be thermostatically controlled and includes a switch which can run the fan on heaters...

      SureStat T110 Weatherproof Heating / Cooling Thermostat thermostat, water, proof, greenhouse, remote, sensor, surestat, temperature, control
      Price: $38.95
      Availability: In Stock
      Item #: 4820400 -

        This thermostat has a weatherproof enclosure making them an excellent option for wet environments. The single stage thermostat can be used to automatically control ventilation fans or heaters. This thermostat was developed with the harsh greenhouse environment in mind. Temperature coil is stainless steel to prevent corrosion. SPDT switch. Wiring required. Features Wide temperature range: 30° to 110° F Fixed 3 degree temperature differential Can be used with millivolt, 12, 24 and 120 volt...

        Flexible Gas Heater Connector Kit gas, pipe, flexible, connector, heater, 1/2, kit, package, set, 24", stainless, steel
        Price: $39.00
        Availability: In Stock
        Item #: 4005010 -

          This kit makes installing the gas line to a heater quick and easy. Just bend the 24" flexible gas line as needed to connect the heater valve to the existing gas pipe. The included gas shut-off provides easy on/off control of gas to your heater, and the side tap allows you to check the incoming gas pressure before it reaches your heater (higher than recommended pressures can damage the gas valve on a heater). All parts are certified for use with gas heaters up to 150,000 BTU input. Kit...

          Quick Sling Flush Mount Hanging Kit
          Free Shipping
          Retail: $145.00
          Price: $115.00
          Availability: In Stock
          Item #: 4005020 -

            Ask yourself this question, How do I install a unit heater to a finished ceiling? Before now, there was no good answer to that question. The Quick Swivel solves that challenge quickly and efficiently. They mount in mere minutes, and they swivel 360 degrees allowing you to be able to direct heat output as required and lock it in place for safety. The Quick Swivel technology allows the installer amazing flexibility to maximize efficiency with the proper directional unit output. Either model will...

            Quick Sling U Mount Hanging Kit
            Free Shipping
            Retail: $145.00
            Price: $119.00
            Availability: In Stock
            Item #: 4005025 -

              Ask yourself this question, How do I install a unit heater to a finished ceiling? Before now, there was no good answer to that question. The Quick Swivel solves that challenge quickly and efficiently. They mount in mere minutes, and they swivel 360 degrees allowing you to be able to direct heat output as required and lock it in place for safety. The Quick Swivel technology allows the installer amazing flexibility to maximize efficiency with the proper directional unit output. Either model will...

              Modine HD Category 3 Horizontal Vent Systems modine, heater, hd, hot, vent, exhaust, category, 3, III, stainless, steel, UL, 1738, system venting, pipe, package
              Price: $195.00
              Availability: In Stock

                3" venting is for Modine models HD30, HD45, HD60, & HD754" venting is for Modine models HD100 & HD125Each vent system comes complete with everything needed to vent a Modine Hot Dawg heater.These 3' stainless steel, gas tight 3" vent systems are approved by Modine for horizontal installation in residential and commercial applications for HD model heaters. Most durable, longest lasting, and lowest maintenance vent system available for Modine Hot Dawg heaters. Modine Garage / Shop Vent Kit...

                Stainless Steel Category 3 Adjustable Length Vent Pipe vent, flue, duct, pipe, furnace, exhaust, gas, modine, sterling, heater, category
                Price: $41.00
                Availability: In Stock

                  Adjustable vent pipes can slide in and out of a standard vent pipe giving you an adjustable length. The amount of adjustment available depends on the length of the pipe it is connected to. NOTE: 2 adjustable vent pipes can't be connected together. Requires at least 4” overlap for a secure connection. Vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from...

                  Stainless Steel Category 3 Heater Vent Adapter vent, flue, duct, pipe, furnace, exhaust, gas, modine, sterling, heater, category, adapter
                  Price: $32.00
                  Availability: In Stock

                    The heater adapters have gaskets on both ends and secure the venting to the heater. Adapters fit most standard gas unit heaters including: Modine, Sterling, and Dayton brands. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV...

                    Stainless Steel Category 3 Standard Vent Pipe vent, flue, duct, pipe, furnace, exhaust, gas, modine, sterling, heater, category
                    Price: $22.00
                    Availability: In Stock

                      The stainless steel heater vent pipe is available in several different sizes and lengths. If you do not find the exact length needed, adjustable length pipes are also available. Vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is...

                      Stainless Steel Category 3 Vent 3" Screened Termination Tee vent, flue, duct, pipe, furnace, exhaust, gas, modine, sterling, heater, category, tee, termination
                      Price: $48.00
                      Availability: In Stock
                      Item #: 4650150 -

                        Used for standard and high-wind through-the-wall terminations. Comes with built-in screens to keep birds out. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US standard for...

                        Stainless Steel Category 3 Vent 45 Degree Elbow vent, flue, duct, pipe, furnace, exhaust, gas, modine, sterling, heater, category, elbow
                        Price: $58.00
                        Availability: In Stock

                          The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US standard for gas venting systems required in category III applications. Category III refers to positive vent pressure...

                          Stainless Steel Category 3 Vent 90 Degree Elbow vent, flue, duct, pipe, furnace, exhaust, gas, modine, sterling, heater, category, elbow
                          Price: $58.00
                          Availability: In Stock

                            The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US standard for gas venting systems required in category III applications. Category III refers to positive vent pressure...

                            Stainless Steel Category 3 Vent Adjustable Wall Thimble vent, flue, duct, pipe, furnace, exhaust, gas, modine, sterling, heater, category, thimble
                            Price: $68.00
                            Availability: In Stock

                              This unique wall thimble has a built-in 18" section of adjustable pipe which goes to the inside of your structure giving you a lot of flexibility when running the vent pipe to your heater. The pipe is also sealed to the thimble so there is no air leakage to worry about. This thimble is for walls 4 1/4" to 8 1/2" thick (extensions are available for thicker walls). The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional...

                              Stainless Steel Category 3 Vent Drip Tee vent, flue, duct, pipe, furnace, exhaust, gas, modine, sterling, heater, category, tee, drip
                              Price: $46.00
                              Availability: In Stock

                                The drip tee is used to drain condensation if you do not have a 1/4" for foot downward slope in your horizontal vent line. Drip tee are for horizontal installations only. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting...

                                Stainless Steel Category 3 Vent Firestop Flashing vent, flue, duct, pipe, furnace, exhaust, gas, modine, sterling, heater, category, flashing
                                Price: $23.00
                                Availability: In Stock

                                  Firestop flashings are recommended for venting through combustible walls less than 4" thick. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US standard for gas venting...

                                  Stainless Steel Category 3 Vent Storm Collar vent, flue, duct, pipe, furnace, exhaust, gas, modine, sterling, heater, category, storm, collar
                                  Price: $20.00
                                  Availability: In Stock

                                    The storm collar is used to create a seal around the vent pipe and the firestop flashing or wall pass through. No collar is needed with the adjustable wall thimble. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US standard for gas venting systems required in category III applications. Category III refers to positive vent pressure which is created by exhaust blowers in unit heaters. These vent systems must be...

                                    Concentric Vent Combustion / Inlet Air Pipe inlet, combustion, air. vent, flue, duct, pipe, furnace, exhaust, gas, sterling, heater, category
                                    Price: $7.95
                                    Availability: In Stock

                                      This galvanized steel vent pipe is used for the combustion (inlet) air side of the Sterling GG heaters when using the concentric vent kit. 4" and 5" pipe connect the air inlet on the heater to the interior inlet on the concentric vent box. 7" and 9" pipe connect to the exterior inlet opening on the concentric vent box and run through the exterior wall to the outside of the structure being heated. Sterling GG30, GG45, GG60, and GG75 use 4" and 7" piping. Sterling GG90, GG105, and GG120 use 5"...