Search Results for "gas heater"

All stocked Sterling exhaust blower motors are listed below. They are all 120v motors. Blower motors only come with what is shown in the picture. Sterling Part # Fits Sterling Models J35R0470011J35R04700 GG30, GG45, TF30, TF45, TF60, TF75, TF100, TF125, TF150, GF150, RF30, RF45, RF60, RF75, SF30, SF45, SF60, SF75, BRT30, BRT45, BRT60, BRT75, BRU30, BRU45, BRU60, BRU75, BTU30, BTU45, BTU60, BTU75, XF100, XF125, XF150 J35R0851011J35R08510 GG60, GG75, TF60, TF75, RF60, RF75, SF60, SF75, BRT60,...

Williams DV heater vent extensions allow the heaters to be vented through walls over 9" thick. Kits are availabe in 15" and 24" lengths. 24" is the maximum venting distance allowed for the DV heaters. Kit Specifications Model 9301 - 15" extension for DV22 & DV30 heatersModel 9302 - 24" extension for DV22 heaterModel 9303 - 24" extension for DV14 & DV30 heatersModel 9304 - 15" extension for DV14 heater Item # 410017, 4100170, 4100172, 4100174, 4100176 ...

These kits include all parts needed to convert Modine PA, PAE, PV, PD & PDP 30-400 heaters from natural gas (NG) to propane (LP). You will need to specify the brand of gas valve on your heater to receive the proper conversion kit. Pictures are shown below. Modine Conversion Kits Include Main burner orifice(s)Pilot orifice(s)Air shutter(s)Conversion spring kit for the gas valve on the heaterInstallation instructions Additional gas valve conversion spring kits are available if needed. We also...

Sterling part # J14R03245-012. 24 volt transformer for Sterling & Beacon Morris gas heaters. Used On The Following Model Numbers:TF030, TF045, TF060, TF075, TF090, TF100, TF125, TF150, TF175, TF200, TF250, TF300, TF350, TF400, RF030, RF045, RF060, RF075, RF090, SF030, SF045, SF060, SF075, GG030, GG045, GG060, GG075, GG090, GG105, GG120, SF100, SF125, SF150, SF175, SF200, SF250, SF300, SF350, SF400, TC100, TC125, TC150, TC175, TC200, TC250, TC300, TC350, TC400, SC100, SC125, SC150, SC175,...

The Robertshaw programmable thermostat can control any of our gas heaters with ease. It is easy to program and helps you save money on energy costs by allowing you to set back the temperature during the night or when you’re away. Convenient 5/1/1 day programming lets you customize your weekday and weekend schedule based on your needs. Unit also allows an appliance to be cut off when you do not want it to be thermostatically controlled. Features a large easy-to-read LCD display with backlight....

The heater adapter has a silicone gasket and locking band on one end to connect to the category 3 piping and a universal screw mount on the opposite end for connecting to the heater. Heater adapters are required to secure the category 3 venting to a gas unit heater. Adapters fit most standard gas unit heaters including: Modine, Sterling, Mr. Heater, Reznor, ADP, and Dayton brands (other heater brands may need some minor modifications for assembly). 3" and 4" universeal adapters include 3 oz....

These are propane conversion spring kits for heater gas valves. They do not contain any other parts for converting a heater's gas type. For that, you will need to purchase the entire heater conversion kit for your specific heater model. Modine Heater Gas Valve Model # OptionsSelect the gas valve model # option that STARTS WITH the same numbers or letters as the valve on your heater. Example: You have a RobertShaw model 7200ER valve. Select the RobertShaw 710, 720 option. NOTICE: Gas valves...

These are propane conversion spring kits for heater gas valves. They do not contain any other parts for converting a heater's gas type. For that, you will need to purchase the entire heater conversion kit for your specific heater model. Modine Heater Gas Valve Model # OptionsSelect the gas valve model # option that STARTS WITH the same numbers or letters as the valve on your heater. Example: You have a RobertShaw model 7200ER valve. Select the RobertShaw 710, 720 option. NOTICE: Gas valves...

This unique wall thimble has a built-in 18" section of adjustable pipe which goes to the inside of your structure giving you a lot of flexibility when running the vent pipe to your heater. The pipe is also sealed to the thimble so there is no air leakage to worry about. This thimble is for walls 4 1/4" to 8 1/2" thick (extensions are available for thicker walls). The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional...

The wall pass through is for 5" pipe and walls 4 1/4" to 8 1/2" thick (extensions are available for thicker walls). A storm collar is recommended to seal around it and the vent pipe. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV...

The universal drain is used to drain condensation if you do not have a 1/4" for foot downward slope in your horizontal vent line or in vertical venting applications also. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting...

The stainless steel heater vent pipe is available in several different sizes and lengths. If you do not find the exact length needed, adjustable length pipes are also available. Vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is...

The 90 degree elbow allows installation of a gas heater at a 90 degree angle inside the structure. It can also be used if vertical runs are needed as well. The angle is not adjustable. This stainless steel vent pipe fitting features a patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV...

The 45 degree elbow allows installation of a gas heater at a 45 degree angle inside the structure. The angle is not adjustable. This stainless steel vent pipe fitting features a patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US...

Firestop flashings are recommended for venting through combustible walls less than 4" thick. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US standard for gas venting...

Vent tees are designed to be used with the condensate caps in vertical or horizontal venting systems. A cap is placed in the lowest part of the Tee and collects any condensate that forms in the venting. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for...

Used for standard and high-wind through-the-wall terminations. Comes with built-in screens to keep birds out. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US standard for...

Condensate caps are designed to be used with the Tee fittings in vertical or horizontal venting systems. It is placed in the lowest port of the Tee and collects any condensate that forms in the venting. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for...

The drip tee is used to drain condensation if you do not have a 1/4" for foot downward slope in your horizontal vent line. Drip tee are for horizontal installations only. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting...

The 30 degree elbow allows installation of a gas heater at a 30 or 60 degree angle inside the structure. The angle is not adjustable. This stainless steel vent pipe fitting features a patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a...

The storm collar is used to create a seal around the vent pipe and the firestop flashing or wall pass through. No collar is needed with the adjustable wall thimble. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US standard for gas venting systems required in category 3 applications. Category 3 refers to positive vent pressure which is created by exhaust blowers in unit heaters. These vent systems must be...

The Modine HD gas valve (Resideo / Honeywell 1 Stage SmartValve) comes setup for natural gas (NG) and includes kit to convert to propane (LP). Replaces Modine Part # 5H76382 (NG) and 5H76383 (LP) This valve works with Modine HD30AH, HD45AH, HD60AH, & HD75AH heaters. These units have a hot surface igniter.

Modine ignition control module part # 5H80689. Intermittent pilot ignition, 1 second pre-purge, infinite ignition trials, 90 second trial time, 5 minutes between trials. Replacement part for Modine P series gas unit heaters with automatic ignition. Replaces part #s 5H73324, 5H73696, 5H73014, 5H73325, 5H70872, 5H71913, 5H71572

Adjustable vent pipes can slide in and out of a standard vent pipe giving you an adjustable length. The amount of adjustment available depends on the length of the pipe it is connected to. Requires at least 4” overlap for a secure connection. Vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738...