Heating

Need an inexpensive and simple thermostat? Thermostatic outlets are the answer. These unique devices plug into a standard electrical outlet and have an internal preset thermostat. Outlets come in two models. The Cooling outlet supplies power at 78° and cuts off at 70° and works great for all types of fans including exhaust, circulation, window, attic, and ceiling fans. The Heating outlet supplies power at 35° and cuts off at 45° and is great for automating heaters to keep room temperatures...

The Robertshaw programmable thermostat can control any of our gas heaters with ease. It is easy to program and helps you save money on energy costs by allowing you to set back the temperature during the night or when you’re away. Convenient 5/1/1 day programming lets you customize your weekday and weekend schedule based on your needs. Unit also allows an appliance to be cut off when you do not want it to be thermostatically controlled. Features a large easy-to-read LCD display with backlight....

This thermostat comes prewired with a 5' remote sensor and a 8' cord with plug-in. Simply plug the thermostat into a standard 110/120 volt outlet. Then plug any 110/120 volt appliance into the outlet on the plug of the thermostat. This model is only available setup for heating but can be rewired for cooling (see instructions). *Plug-in thermostats can not be used with our gas heaters. They require 24 volt thermostats. Features Widest temperature range: 30° to 110° F 5' waterproof remote sensor...

This thermostat has a watertight enclosure making them an excellent option for wet environments. The two stage thermostat can be used to automatically open motorized louvers before cutting on an exhaust fan(s), stage multiple fan or heater systems, or operate multiple speed exhaust fans that do not already have a built-in control. Wiring required. SureStat Thermostat Features Wide temperature range: 30° to 110° F Fixed 3 degree temperature differential between stages Can be used with...

This thermostat comes prewired with a 5' remote sensor and a 6' cord with plug-in. Simply plug the thermostat into a standard 110/120 volt outlet. Then plug any 110/120 volt appliance into the outlet on the plug of the thermostat. This model is only available setup for heating but can be rewired for cooling (see instructions). *Plug-in thermostats can not be used with our gas heaters. They require 24 volt thermostats. Features Widest temperature range: 0° to 120° F 5' waterproof remote sensor...

The Robertshaw programmable thermostat is specifically made for controlling heaters equipped with 2 stage gas valves. It is easy to program and helps you save money on energy costs by allowing you to set back the temperature during the night or when you’re away. Convenient 5/1/1 and 7 day programming lets you customize your daily schedule based on your needs. Unit also allows an appliance to be cut off when you do not want it to be thermostatically controlled. Features a large easy-to-read LCD...

This programmable thermostat offers 2 stage heating control. Weekday/Weekend programming - use as a 5-1-1 (Weekdays, Saturday, Sunday) or 5-2 (Weekdays, Weekend) programmable thermostat, whichever best fits your lifestyle. Can be powered by appliance and/or batteries. Wiring required. Thermostat Features Wide temperature range: 40° to 90° F Fixed 1 degree differential between stages Auto fan switch Can be used with millivolt and 24 volt appliances Large, clear, backlit display - easy to read...

These kits include all of the pipe and fittings needed for horizontal venting of the Sterling GG gas heaters equipped with the concentric vent kit (up to a 5' exhaust run).The horizontal pipe kits include: (items in red text shown in picture above) 5' of UL1738 stainless steel exhaust pipe (35" adjustable length pipe + 24" pipe) UL1738 stainless steel heater adapter 4' of interior galvanized intake pipe- 4" for models GG30, GG45, GG60, and GG75- 5" for models GG90, GG105, and GG120 2' of...

Ask yourself this question, How do I install a unit heater to a finished ceiling? Before now, there was no good answer to that question. The Quick Swivel solves that challenge quickly and efficiently. They mount in mere minutes, and they swivel 360 degrees allowing you to be able to direct heat output as required and lock it in place for safety. The Quick Swivel technology allows the installer amazing flexibility to maximize efficiency with the proper directional unit output. Either model will...

Ask yourself this question, How do I install a unit heater to a finished ceiling? Before now, there was no good answer to that question. The Quick Swivel solves that challenge quickly and efficiently. They mount in mere minutes, and they swivel 360 degrees allowing you to be able to direct heat output as required and lock it in place for safety. The Quick Swivel technology allows the installer amazing flexibility to maximize efficiency with the proper directional unit output. Either model will...

Sterling GG heaters can be converted to separated combustion when this kit is added to the heater. Separated combustion heaters draw combustion air from outside to ensure that the unit will always have plenty of fresh clean air. The fresh air supply reduces common concerns about dusty, dirty, or high humidity applications. You can also decrease heating costs by as much as 10% because no cold outside air is being sucked into the structure when the heater is running. Pipe must be purchased...

UPDATEThis has been replaced by the Surestat TS110 thermostat. Click here to view the updated version.This thermostat has a weatherproof enclosure making them an excellent option for wet environments. The single stage thermostat can be used to automatically control ventilation fans or heaters. This thermostat was developed with the harsh greenhouse environment in mind. Temperature coil is stainless steel to prevent corrosion. SPDT switch. Wiring required. SureStat Thermostat Features Wide...

UPDATEThis has been replaced by the Surestat TS116 thermostat. Click here to view the updated version.This single stage thermostat comes prewired with an 8' grounded Plug in power cord. Simply plug the thermostat into a standard 110/120 volt outlet. Then plug any 110/120 volt appliance into the outlet on the plug of the thermostat. Heating thermostat is great for automating portable electric heaters. SureStat Thermostat Features Wide temperature range: 30° to 110° F Fixed 3 degree differential...

These kits include all of the pipe and fittings needed for vertical venting of the Sterling GG gas heaters equipped with the concentric vent kit (up to a 5' exhaust run).The vertical pipe kits include: (items in red text shown in picture above) 5' of UL1738 stainless steel exhaust pipe(35" adjustable length pipe + 24" pipe) UL1738 stainless steel tee with condensate cap UL1738 stainless steel heater adapter 2' of interior galvanized intake pipe- 4" for models GG30, GG45, GG60, and GG75- 5" for...

This elbow set allows mounting of the Sterling GG heater at a 45 degree angle when venting horizontally with the concentric vent kit. It includes a stainless steel category III 45 degree elbow for the exhaust and an adjustable galvanized elbow for the combustion (inlet) air. Sterling GG30, GG45, GG60, and GG75 use 4" elbows. Sterling GG90, GG105, and GG120 use 5" elbows. Item # 46, 4610147, 4610157

Vent Size Compatible Gas Heaters 3 inch Modine Hot Dawg - HD30, HD45, HD60, & HD75 4 inch Modine Hot Dawg - HD100 & HD125   Mr. Heater / Big Maxx - MHU50, MHU80, MHU125   Reznor - UDX & UDZ (up to 125K BTU)   Dayton - Low profile unit heaters up to 120K BTU These universal heater exhaust kits come complete with everything needed to vent a gas heater up to 3' (additional pipe and/or a drip tee may be required for some units). These 3' stainless steel, gas tight, category 3 vent...

For Sterling models GG30, GG45, GG60, GG75, GG90, GG105, & GG120Each vent system comes complete with everything needed to vent a Sterling GG heater. These stainless steel, gas tight 4" vent systems are approved by Sterling for horizontal installation in residential and commercial applications for GG model heaters. These are the most durable, longest lasting, and lowest maintenance vent systems available for these gas heaters. All vent systems are for horizontal venting of all Sterling GG gas...

This 5" vent kit is for Sterling TF100, TF125, TF150, TF175, TF200, TF250, XF100, XF125, XF150, XF175, XF200, XF250, GF150, and GF250 models. (Not for use with Sterling XF Concentric Vent Kits)Each vent system comes complete with everything needed to vent the Sterling TF, GF, and XF series heaters. These stainless steel, gas tight vent systems are approved by Sterling for horizontal venting applications for these gas heaters. These are the most durable, longest lasting, and lowest maintenance...

These horizontal vent kits are for side wall venting the Sterling TF and XF series heaters. All pipe and fittings are galvanized steel. Enough piping is included for up to a 5' run.The Sterling TF / XF vent kit includes: 3' of type B vent pipe 2' of single wall vent pipe Type B wall thimble Sterling approved horizontal vent cap 90° elbow Tube of high temp silicone sealant Assembly hardware, and instructions The 5" Kit is for Sterling TF100, XF100, TF125, XF125, TF150, XF150, TF175, XF175,...

These concentric vent kits for the Sterling XF heaters allow both the air intake and exhaust to vent through the outside wall of your structure with only one hole. Piping must be purchased separately. Concentric kits are available for horizontal or vertical venting. Concentric vent kits include: (shown above) Concentric vent boxInlet air screen or capDeflector discVent capExhaust pipe gasketsHigh-temp silicone Please note: The concentric vent kit does not include any piping. Pipe and fittings...

The wall pass through is for 5" pipe and walls 4 1/4" to 8 1/2" thick (extensions are available for thicker walls). A storm collar is recommended to seal around it and the vent pipe. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV...

Adjustable vent pipes can slide in and out of a standard vent pipe giving you an adjustable length. The amount of adjustment available depends on the length of the pipe it is connected to. Requires at least 4” overlap for a secure connection. Vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738...

The heater adapter has a silicone gasket and locking band on one end to connect to the category 3 piping and a universal screw mount on the opposite end for connecting to the heater. Heater adapters are required to secure the category 3 venting to a gas unit heater. Adapters fit most standard gas unit heaters including: Modine, Sterling, Mr. Heater, Reznor, ADP, and Dayton brands (other heater brands may need some minor modifications for assembly). 3" and 4" universeal adapters include 3 oz....

The stainless steel heater vent pipe is available in several different sizes and lengths. If you do not find the exact length needed, adjustable length pipes are also available. Vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is...

The 30 degree elbow allows installation of a gas heater at a 30 or 60 degree angle inside the structure. The angle is not adjustable. This stainless steel vent pipe fitting features a patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a...

The 45 degree elbow allows installation of a gas heater at a 45 degree angle inside the structure. The angle is not adjustable. This stainless steel vent pipe fitting features a patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US...

The universal drain is used to drain condensation if you do not have a 1/4" for foot downward slope in your horizontal vent line or in vertical venting applications also. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting...

The 90 degree elbow allows installation of a gas heater at a 90 degree angle inside the structure. It can also be used if vertical runs are needed as well. The angle is not adjustable. This stainless steel vent pipe fitting features a patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV...

This unique wall thimble has a built-in 18" section of adjustable pipe which goes to the inside of your structure giving you a lot of flexibility when running the vent pipe to your heater. The pipe is also sealed to the thimble so there is no air leakage to worry about. This thimble is for walls 4 1/4" to 8 1/2" thick (extensions are available for thicker walls). The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional...

The drip tee is used to drain condensation if you do not have a 1/4" for foot downward slope in your horizontal vent line. Drip tee are for horizontal installations only. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting...

Firestop flashings are recommended for venting through combustible walls less than 4" thick. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US standard for gas venting...

Used for standard and high-wind through-the-wall terminations. Comes with built-in screens to keep birds out. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US standard for...

The storm collar is used to create a seal around the vent pipe and the firestop flashing or wall pass through. No collar is needed with the adjustable wall thimble. All pipe and fittings are UL1738 approved for category II, III and IV venting applications. What is UL 1738? In short, it is a US standard for gas venting systems required in category 3 applications. Category 3 refers to positive vent pressure which is created by exhaust blowers in unit heaters. These vent systems must be...

Vent tees are designed to be used with the condensate caps in vertical or horizontal venting systems. A cap is placed in the lowest part of the Tee and collects any condensate that forms in the venting. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for...

Condensate caps are designed to be used with the Tee fittings in vertical or horizontal venting systems. It is placed in the lowest port of the Tee and collects any condensate that forms in the venting. The stainless steel heater vent pipe and fittings feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90° from mechanical locking bands. All pipe and fittings are UL1738 approved for...

The wall thimble extension is used to add 6” of length to Wall Pass Through and Wall Thimble for thicker walls. What is UL 1738? In short, it is a US standard for gas venting systems required in category 3 applications. Category 3 refers to positive vent pressure which is created by exhaust blowers in unit heaters. These vent systems must be constructed of AL29-4C® stainless steel, contain gaskets for sealing, and have a built in mechanical locking band among other requirements. All category 3...

This is a replacement valve used in Modine PA standing pilot heaters that have 120 volt controls (Pre 1980 models). Each valve comes setup for natural gas and includes kit to convert to propane. This is a White Rodgers gas valve with 3/4" x 3/4" openings and comes with 1/2" reducers bushings for the inlet and outlet so it can be used with any size unit. (Not for use with automatic pilot ignition systems)

These gas valves are used in Modine PD, PAE, and PA 24 volt heaters with standing pilot igniters. Each valve comes setup for natural gas and includes kit to convert to propane. (Not for use with automatic pilot ignition systems) The Honeywell / Resideo 1/2" x 1/2" standing pilot gas valve is for Modine heaters up to 200,000 BTU input. Can be setup for propane or natural gas. It replaces Modine part #s 5H71923, 5H71924, & 5H73118-1. The Honeywell / Resideo 1/2" x 3/4" standing pilot gas valve...

This is an approved / listed vent cap for vertical / horizontal venting and high wind applications. The Americap is UL-listed, constructed of aluminum, and its patented design of ports and baffles keep rain and debris out of the vent. They are compatible with all of the vent pipe that we offer. Item # 4620055, 4620060

This galvanized steel adjustable elbow is used for the combustion (inlet) air side of the Sterling GG heaters when using the concentric vent kit where turns are needed in your inlet air pipe run. Do not use in the exhaust venting. Sterling GG30, GG45, GG60, and GG75 use 4". Sterling GG90, GG105, and GG120 use 5". Features 26 gauge galvanized steel construction Angle can be adjusted up to 90 degrees Crimped end for a secure interlocking fit Item # VO 4620250, 4620260 ...

This galvanized steel vent pipe is used for the combustion (inlet) air side of the Sterling GG heaters when using the concentric vent kit. 4" and 5" pipe connect the air inlet on the heater to the interior inlet on the concentric vent box. 7" and 9" pipe connect to the exterior inlet opening on the concentric vent box and run through the exterior wall to the outside of the structure being heated. Sterling GG30, GG45, GG60, and GG75 use 4" and 7" piping. Sterling GG90, GG105, and GG120 use 5"...

This galvanized steel tee and condensate cap set are used to transition to a vertical run in the combustion (inlet) air side of the Sterling GG heaters when using the concentric vent kit. Sterling GG30, GG45, GG60, and GG75 use 4". Sterling GG90, GG105, and GG120 use 5". Features 26 gauge galvanized steel construction Crimped end for a secure interlocking fit Item # 4620420, 4620421, 4620423, 4620425, 4620426, 4620428 ...

These roof flashings go around the exterior intake pipe in the Sterling concentric vent kits to keep out rain and snow and provide a finished look. The 7" models are for the 4" concentric kits. The 9" models are for the 5" concentric kits. The standard pitch flashings are for roofs with 1/12 to 6/12 pitch. The steep pitch flashings are for roofs with 7/12 to 12/12 pitch.

These storm collars go around the exterior intake pipe in the Sterling concentric vent kits to keep out rain and snow and provide a finished look.

Part # 18 on the Modine Parts DiagramTransformer converts line 120v to low 24v for heater controls. Modine Part # 5H71956-1 (Works with most Modine PD, PDP, PAE, & PA heaters built after 1986) Alternate part numbers: 5H71956B1, 5H71956A1, 5H0719560001

Part # 24 on the Modine Parts DiagramModine heater manual reset blocked vent switch. Modine Part # 5H73057 (Works with all gravity vent Modine PD, PAE, & PA heaters built after 1986)

These kits include all parts needed to convert Modine PA, PAE, PV, PD & PDP 30-400 heaters from propane (LP) to natural gas (NG). You will need to specify the brand of gas valve on your heater to receive the proper conversion kit. Pictures are shown below. Modine Conversion Kits Include Main burner orifice(s)Pilot orifice(s)Conversion spring kit for the gas valve on the heaterInstallation instructions Additional gas valve conversion spring kits are available if needed. We also offer Propane...

These kits include all parts needed to convert Modine PA, PAE, PV, PD & PDP 30-400 heaters from natural gas (NG) to propane (LP). You will need to specify the brand of gas valve on your heater to receive the proper conversion kit. Pictures are shown below. Modine Conversion Kits Include Main burner orifice(s)Pilot orifice(s)Air shutter(s)Conversion spring kit for the gas valve on the heaterInstallation instructions Additional gas valve conversion spring kits are available if needed. We also...